-
ROBOSLIT® plus OHP
Dual Turret Slitter Rewinder – Fully Loaded
-
ROBOSLIT® plus OHP
ROBOSLIT® Plus OHP Dual Turret Slitter Rewinder with Over Head Path
The ROBOSLIT ® plus OHP Dual Turret Slitter Rewinder is loaded with a host of features that enable it to produce flush rewind reels at upto 1000 m/min in a safe and comfortable environment, using integrated material handling devices and a user interface that allows fast, automated setups, easy process monitoring and data logging for MIS. The OHP (Overhead Path) layout offers a hygienic work environment while providing a convenient working space for operator.
Technical Specification
| Position , type of unwind | Separate, Overhead Path |
| Maximum web width | 1300 mm (upto 1650 mm on request) |
| Maximum unwind diameter | 1000 mm |
| Unwind core inner diameter | 76 mm and 152 mm |
| Unwind reel loading mechanism | Electro-mechanical, linear floor lift |
| Maximum rewind diameter | 600 mm |
| Rewind core inner diameter | 76 mm |
| Minimum slit width | 50 mm (30 mm on request) |
| Layon displacement | Horizontal |
| Layon actuator | Servo Motor |
| Rewind splicing | Automatic |
| Turret structure | Supported |
| Rewind reel offloading mechanism | Motorized ejector |
| Rewind reel offloading mechanism | Auto off loader to bring the ejected reels to waist level for easier removal |
| Tension management | Automatic, Intelligent (ITM™) |
| Job setup | Automatic pre-positioning of web guide, traveling laser for cutters and core positioning |
| Static management | Static elimination & monitoring |
| Maximum machine speed | 1000 m/min |
| Rewind change-over time | 30 Seconds |
| Materials handled | Plastic films, flexible packaging laminates |
Optional Features
| Fully Automatic cutter positioning as per recipe | |
| Shear cutting mode – tangential, for paper and aluminium foil based laminates | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | |
| Advanced Auto off-loader with rewind reel ejector to integrate with onward material handling solutions | |
| Trim winding unit for the compact accumulation of trim waste (*upto 800 m/min) | |
| Rewinding on 152 mm/ 70 mm ID rewind cores | |
| Increased diameter capabilities at unwind upto 1200 mm | |
| Additional safety devices | |
| CCTV | |
| SCADA |
Comparison of ROBOSLIT ® plus with other dual turret machine
Comparison of Technical Specifications
| Technical Specifications | ROBOSLIT ® plus OHP | ROBOSLIT ® OHP |
|---|---|---|
|
 |
|
| Position, type of unwind | Separate, Overhead Path | Separate, Overhead Path |
| Maximum Web Width | 1300 mm (upto 1650 mm on request) | 1300 mm (upto 1650 mm on request) |
| Maximum Unwind Diameter | 1000 mm | 1000 mm |
| Maximum Rewind Diameter | 600 mm | 600 mm |
| Rewind core inner Diameter | 76 mm | 76 mm |
| Unwind reel loading mechanism | Electro-mechanical, linear floor lift | Optional in this model |
| Minimum Slit Width | 50 mm (30 mm on request) | 50 mm (30 mm on request) |
| Layon displacement | Horizontal | Horizontal |
| Layon actuator | Servo Motor | Pneumatic piston |
| Rewind splicing | Automatic | Automatic |
| Tension management | Automatic, intelligent (ITM™) | Automatic, intelligent (ITM™) |
| Job setup | Automatic pre-positioning | Manual |
| Turret structure | Supported | Cantilevered |
| Rewind reel displacement mechanism | Motorized ejector | Optional in this model |
| Rewind reel offloading mechanism | Auto off loader | Optional in this model |
| Static management | Static elimination & monitoring | Static elimination |
| Maximum machine speed | 1000 m/min | 800 m/min |
| Rewind change-over time | 30 seconds | 26 seconds |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| ROBOSLIT ® plus OHP | ROBOSLIT ® OHP | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Fully Automatic cutter positioning as per recipe | ||
| Electro-mechanical, linear floor lift for unwind reel | Standard | |
| Pneumatic/ Vacuum splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for displacing the rewind reels on to the off loader | Standard | |
| Auto off loader to bring the ejected reels to waist level for easier removal | Standard | |
| Advanced Auto off-loader with rewind reel ejector to integrate with onward material handling solutions | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
