Make our EXPERIENCE work to your
advantage
-
PRIMASLIT® FL
Duplex Slitter Rewinder - Front Loading
PRIMASLIT ® FL
The PRIMASLIT ® FL (Front Loading) Duplex Slitter Rewinder is the most compact converting slitter with both the unwind and rewind sections on the same side, allowing free cutter access, easier web passage and requiring minimum operator movement.
Technical Specification
| Position , type of unwind | Front, integral |
| Maximum web width | 1300 mm (1650 mm) |
| Maximum unwind diameter | 800 mm |
| Unwind core inner diameter | 76 mm and 152 mm |
| Maximum rewind diameter | 500mm |
| Rewind core inner diameter | 76 mm (152 mm/ 70 mm on request) |
| Minimum slit width | 50 mm (25 mm) |
| Layon displacement | Angular |
| Layon actuator | Pneumatic piston |
| Rewind splicing | Manual |
| Tension management | Automatic, requires operator input |
| Job setup | Manual |
| Static management | Static elimination |
| Maximum machine speed | 600 m/min |
| Rewind change-over time | Job and operator dependant |
| Materials handled | Plastic films, flexible packaging laminates |
Optional Features
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | |
| Rewinding on 152 mm / 70 mm ID rewind cores | |
| One touch off loader to transport the ejected reels to floor/ pallet level | |
| Trim winding unit for the compact accumulation of trim waste | |
| Additional safety devices | |
| CCTV | |
| SCADA |
Comparison of PRIMASLIT ® FL with other duplex machines
Comparison of Technical Specifications
| Technical Specifications | PRIMASLIT ® FL | PRIMASLIT ® RL |
|---|---|---|
|
|
|
| Position, type of unwind | Front, Integral | Rear, Integral |
| Maximum Web Width | 1300mm (1650 mm) | 1300 mm (1650 mm) |
| Maximum Unwind Diameter | 800mm | 1000mm |
| Unwind core inner Diameter | 76 mm and 152 mm | 76 mm and 152 mm |
| Maximum Rewind Diameter | 500 mm | 600 mm |
| Rewind core inner Diameter | 76 mm (152 mm /70 mm on request) | 76 mm (152 mm /70 mm on request) |
| Minimum Slit Width | 50 mm (25 mm) | 50 mm (25 mm) |
| Layon displacement | Angular | Angular |
| Layon actuator | Pneumatic piston | Pneumatic piston |
| Rewind splicing | Manual | Manual |
| Tension management | Automatic, requires operator input | Automatic, requires operator input |
| Job setup | Manual | Manual |
| Static management | Static elimination | Static elimination |
| Maximum Machine Speed | 600 (m/min) | 600 (m/min) |
| Rewind splicing | Manual | Manual |
| Rewind change-over time | Job and operator dependant | Job and operator dependant |
| Materials handled | Plastic films, flexible packaging laminates | Plastic films, flexible packaging laminates |
Possibility of Optional Features
| PRIMASLIT ® FL | PRIMASLIT ® RL | |
|---|---|---|
| Optional features ( Optional, Not offered ) | |
|
| Shear cutting mode – tangential, for paper and aluminum foil based laminates | ||
| Electro-mechanical, linear floor lift for unwind reel | ||
| Splice table at unwind for registered joints | ||
| Rewinding on 152 mm/ 70 mm ID rewind cores | ||
| Motorized ejector for the displacement of rewind reels | ||
| One touch off loader to transport the ejected reels to floor/ pallet level | ||
| Trim winding unit for the compact accumulation of trim waste | ||
| Increased diameter capabilities at unwind | ||
| Increased diameter capabilities at rewind | ||
| Additional safety devices | ||
| CCTV | ||
| SCADA |
